Bluelab pH Controller Connect Manual Bedienungsanleitung

Care and use guide*6 monthsfor pH probe1 Bluelab Connect Stickrequired to data log(sold seperately)

English1014.0 pH calibrationpH calibration is important before fi rst use. It ensures pH measurements and/or pH stock solution dosing is accurate. T

English1114.0 pH calibration cont.To calibrate the pHClean pH probe tip.See section 26.0 (the pH probe does not require cleaning before the fi rst u

English1215.0 Placement of the probesThe tip of the Bluelab pH Probe must be submerged in the liquid for a measurement to occur. It is optional to

English1318.0 Set the dosing OnTime and O TimeA dosing cycle includes the OnTime and the OffTime that the peristaltic pump doses the system for. T

English1419.0 Set alarms (optional)The alarm function alerts you when the solution deviates too far from the desired pH. When an alarm condition is

English1521.0 Priming the pump / manual dosing‘Pump Ovrde’ allows you to fi ll the inlet and outlet tubes with dosing solution before fi rst use (rem

English1624.0 Using the connect so wareOnce the pH controller connect is set up and added to the connect software you can now data log and adjust yo

English1726.0 Cleaning the Bluelab pH ProbeTo ensure accurate readings the pH probe tip needs to be rinsed in water and cleaned prior to calibration

English1827.0 Troubleshooting guideTrouble Reason CorrectionDevice doesn’t add to connect softwareDevice authentication code incorrect.Enter correct

English1928.0 Frequently asked questionsQuestion AnswerWhy is the ‘’ or ‘’ fl ashing but the pump is not turning?The ‘’ or ‘’ will fl ash when eve

English2Features 3Bluelab pH Controller Connect 3What’s in the box? 4IMPORTANT - Bluelab pHProbe care 5Set up the Bluelab ConnectSo ware 6Install

English2029.0 Technical speci cationspHControl parameterpH - user selectable single direction(up or down)Control range0.1 – 13.9 pHDose rate10 ml p

English21If your pH isn’t in the right range – and that’s 5.5-6.5 for most plant varieties – your nutrients are likely wasted.We say that’s a problem

English22Bluelab pH Probe KCl Storage SolutionThe perfect solution to store and hydrate your Bluelab pH products.Bluelab pH Probe KCl Storage Solution

English23Bluelab pH Controller Connect limited product guaranteeBluelab Corporation Limited guarantees the Bluelab pH Controller Connect for aperiod o

English3FeaturesONE Bluelab Connect Stick is required, sold seperatelyFlashing high and low alarm with safety control lockoutsLocal and Cloud data log

English4PLEASE FOLLOW THE MANUAL STEP BY STEP BEFORE FIRST USE BEGINS1.0 What’s in the box?Please verify the box contents from the information below

English52.0 IMPORTANT - Bluelab pH Probe carepH probes DO NOT last forever. They age through normal use and will eventually fail. The life time of a

English66.0 Connect the Bluelab Temperature ProbeInsert the temperature probe connector to the base of the pH controller connect where ‘ATC’ is lab

English79.0 Set up outlet dosing tubeInsert the remaining dosing tube with connector into the RIGHT peristaltic pump tube. This is the ‘outlet dosi

English811.0 Display menu and buttonsOne press of the ‘menu’ button will take you into the menu. To exit the menu, press ‘menu’ again. Changes will

English912.0 Factory settings The pH controller connect is set to the following values by default:Note: ‘Pump runtime’ [HH:MM:SS] is the time the p